Dell PowerEdge VRTX - Manual (Page 587)

IGMP Snooping Commands 587
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Global Configuration mode
User Guidelines
A port that is a forbidden mrouter port cannot be a Multicast router port (i.e.
cannot be learned dynamically or assigned statically).
You can execute the command before the VLAN is created.
Example
console(config)# ip igmp snooping vlan 1 forbidden mrouter
interface gi0/1
ip igmp snooping vlan static
Use the ip igmp snooping vlan static Global Configuration mode command
to register an IP-layer Multicast address to the bridge table, and to add static
ports to the group defined by this address. Use the no form of this command
to remove ports specified as members of a static Multicast group.
Syntax
ip igmp snooping vlan vlan-id static ip-address [interface interface-list ]
no ip igmp snooping vlan vlan-id static ip-address [interface interface-list ]
Parameter
• vlan-id —Specifies the VLAN.
• ip-address —Specifies the IP Multicast address.
• i nterface-list —Specifies a list of interfaces. The interfaces can be of one of
the following types: Ethernet port or Port-channel.
Default Configuration
No Multicast addresses are defined.
Command Mode
Global Configuration mode