Dell PowerEdge VRTX - Manual (Page 260)

260 Authentication, Authorization and Accounting
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\AAA.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
The device uses the configured priorities of the available RADIUS servers in
order to select the RADIUS server.
If a new supplicant replaces an old supplicant (even if the port state remains
authorized), the software sends a stop message for the old supplicant and a
start message for the new supplicant.
In multiple sessions mode (dot1x multiple-hosts authentication), the
software sends start/stop messages for each authenticated supplicant.
In multiple hosts mode (dot1x multiple-hosts), the software sends start/stop
messages only for the supplicant that has been authenticated.
The software does not send start/stop messages if the port is force-authorized.
The software does not send start/stop messages for hosts that are sending
traffic on the guest VLAN or on the unauthenticated VLANs.
The following table describes the supported Radius accounting Attributes
Values and when they are sent by the switch.
Name Start Stop Description
User-Name (1) Yes Yes Supplicant’s identity.
NAS-IP-Address (4) Yes Yes The switch IP address that is
used for the session with the
RADIUS server.
NAS-Port (5) Yes Yes The switch port from where the
supplicant has logged in.
Class (25) Yes Yes The arbitrary value that is
included in all accounting
packets for a specific session.
Called-Station-ID (30) Yes Yes The switch MAC address.
Calling-Station-ID (31) Yes Yes The supplicant MAC address.
Acct-Session-ID (44) Yes Yes A unique accounting identifier.
Acct-Authentic (45) Yes Yes Indicates how the supplicant
was authenticated.
Acct-Session-Time (46) No Yes Indicates how long the
supplicant was logged in.
Acct-Terminate-Cause (49) No Yes Reports why the session was
terminated.