Dell PowerEdge VRTX - Manual (Page 515)

Spanning-Tree Commands 515
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Spanning-Tree.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
show spanning-tree
Use the show spanning-tree Privileged EXEC mode command to display the
spanning-tree configuration.
Syntax
show spanning-tree [interface-id] [ instance instance-id]
show spanning-tree [detail] [active | blockedports] [ instance instance-id]
show spanning-tree mst-configuration
Parameters
• instance instance-id —Specifies the spanning tree instance ID. (Range:
1–
16
) .
• detail—Displays detailed information.
• active—Displays active ports only.
• blockedports—Displays blocked ports only.
• mst-configuration—Displays the MST configuration identifier.
• interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Default Configuration
If no interface is specified, the default is all interfaces.
Command Mode
Privileged EXEC mode
User Guidelines
This command only works when MST is enabled.