Adobe Photoshop CS3 - Manual (Page 255)

PHOTOSHOP CS3
User Guide
248
To change the lasso pointer so that it indicates the lasso width, press the Caps Lock key. You can change the pointer
while the tool is selected but not in use.
Contrast To specify the lasso’s sensitivity to edges in the image, enter a value between 1% and 100% for Contrast. A
higher value detects only edges that contrast sharply with their surroundings; a lower value detects lower-contrast
edges.
Frequency To specify the rate at which the lasso sets fastening points, enter a value between 0 and 100 for Frequency.
A higher value anchors the selection border in place more quickly.
On an image with well-defined edges, try a higher width and higher edge contrast, and trace the border roughly. On
an image with softer edges, try a lower width and lower edge contrast, and trace the border more precisely.
Stylus Pressure If you are working with a stylus tablet, select or deselect the Stylus Pressure option. When the option
is selected, an increase in stylus pressure decreases the edge width.
While creating a selection, press the right bracket (]) to increase the Magnetic Lasso edge width by 1 pixel; press the
left bracket ([) to decrease the width by 1 pixel.
5 Click in the image to set the first fastening point. Fastening points anchor the selection border in place.
6 To draw a freehand segment, either release or keep the mouse button depressed, and then move the pointer along
the edge you want to trace.
The most recent segment of the selection border remains active. As you move the pointer, the active segment snaps
to the strongest edge in the image, based on the detection width set in the options bar. Periodically, the Magnetic
Lasso tool adds fastening points to the selection border to anchor previous segments.
7 If the border doesn’t snap to the desired edge, click once to add a fastening point manually. Continue to trace the
edge, and add fastening points as needed.
Fastening points anchor selection border to edges
8 To switch temporarily to the other lasso tools, do one of the following:
• To activate the Lasso tool, hold down Alt (Windows) or Option (Mac OS), and drag with the mouse button
depressed.
• To activate the Polygonal Lasso tool, hold down Alt (Windows) or Option (Mac OS), and click.
9 To erase recently drawn segments and fastening points, press the Delete key until you’ve erased the fastening
points for the desired segment.
10 Close the selection border:
• To close the border with a freehand Magnetic segment, double-click, or press Enter or Return.
• To close the border with a straight segment, hold down Alt (Windows) or Option (Mac OS), and double-click.