Adobe Photoshop CS3 - Manual (Page 213)

PHOTOSHOP CS3
User Guide
206
Chromatic Aberration Corrects color fringing. Zoom in on the image preview to get a closer view of the fringing as
you make the correction.
Fix Red/Cyan Fringe Compensates for red/cyan color fringing by adjusting the size of the red channel relative to the
green channel.
Fix Blue/Yellow Fringe Compensates for blue/yellow color fringing by adjusting the size of the blue channel relative
to the green channel.
Vignette Corrects images that have darkened edges caused by lens faults or improper lens shading.
Amount Sets the amount of lightening or darkening along the edges of an image.
Midpoint Specifies the width of area affected by the Amount slider. Specify a lower number to affect more of the
image. Specify a higher number to restrict the effect to the edges of the image.
Vertical Perspective Corrects image perspective caused by tilting the camera up or down. Makes vertical lines in an
image parallel.
Horizontal Perspective Corrects image perspective, making horizontal lines parallel.
Angle Rotates the image to correct for camera tilt or to make adjustments after correcting perspective. You can also
use the Rotate Straighten tool to make this correction. Drag along a line in the image that you want to make
vertical or horizontal.
Edge Specifies how to handle the blank areas that result from pincushion, rotation, or perspective corrections. You
can fill blank areas with transparency or a color (background color), or you can extend the edge pixels of the image.
Scale Adjusts the image scale up or down. The image pixel dimensions aren’t changed. The main use is to remove
blank areas of the image caused by pincushion, rotation, or perspective corrections. Scaling up effectively results in
cropping the image and interpolating up to the original pixel dimensions.
Adjust the Lens Correction preview and grid
• To change the image preview magnification, use the Zoom tool or the zoom controls in the lower left side of the
preview image.
• To move the image in the preview window, select the hand tool and drag in the image preview.
• To use the grid, select Show Grid at the bottom of the dialog box. Use the Size control to adjust the grid spacing
and the Color control to change the color of the grid. You can move the grid to line it up with your image using
the Move Grid tool
.
Set camera and lens defaults
You can save the settings in the Lens Correction dialog box to reuse with other images made with the same camera,
lens, and focal length. Photoshop saves settings for distortion, vignetting, and chromatic aberration. Perspective
correction settings are not saved. You can save and reuse settings in two ways:
• Manually save and load settings. Set options in the dialog box, and then choose Save Settings from the Settings
menu
. To use the saved settings, choose them from the Settings menu. You can also load saved settings that
don’t appear in the menu using the Load Settings command in the Settings menu.
• Set a lens default. If your image has EXIF metadata for the camera, lens, focal length, and f-stop, you can save the
current settings as a lens default. To save the settings, click the Set Lens Default button. When you correct an image
that matches the camera, lens, focal length, and f-stop, the Lens Default option becomes available in the Settings
menu. This option is not available if your image doesn’t have EXIF metadata.