Dell POWEREDGE M1000E User Manual
Page 819
Fabric OS Message Reference
743
53-1001767-01
SULB-1009
128
lists additional firmwareDownload error messages and error codes. They provide more
details on why firmwareDownload failed.
“firmwareRestore is entered. System will reboot and a firmwareCommit operation will start
upon boot up.”
0xa8
"Switch is relocating the AP image."
0xa9
"The AP image is relocated successfully."
0xaa
"Switch reboots during relocating the AP image. The operation will be restarted."
0xab
“Blade failed to reboot with the original image. firmwareRestore command failed.”
0xac
TABLE 10
Error Messages and Error Codes
Error Message
Error Code
"Image is up-to-date. No need to download the same version of firmware."
0xF
“Upgrade is inconsistent. Run the bootEnv (root) command to correct the inconsistency before
proceeding.”
0x10
“OSRootPartition is inconsistent. Run the bootEnv (root) command to correct the inconsistency
before proceeding. For example: swap OSRootPartitions and reboot.”
0x11
“Unable to access the required package list file. Check whether the switch is supported by the
requested firmware. Also check firmwareDownload help page for other possible failure
reasons.”
0x12
"The RPM package database is inconsistent. Contact your service provider for recovery."
0x13
"Out of memory."
0x14
"Failed to download RPM package."
0x15
"Unable to create firmware version file."
0x16
"Unexpected system error."
0x17
“Error in getting lock device for firmwareDownload.”
0x18
“Error in releasing lock device for firmwareDownload.”
0x19
“firmwareCommit failed.”
0x1a
"Firmware directory structure is not compatible. Check whether the firmware is supported on
this platform."
0x1b
"Failed to load the Linux kernel image."
0x1c
“OSLoader is inconsistent. Run the bootEnv (root) command to correct the inconsistency before
proceeding.”
0x1d
“New image has not been committed. Run firmwareCommit or firmwareRestore first and then
try firmwareDownload.”
0x1e
“firmwareRestore failed.”
0x1f
"Both images are mounted to the same device."
0x20
“Unable to unionist old packages.”
0x21
“firmwareDownload is already in progress.”
0x22
TABLE 9
Status Messages and Status Codes
Status Message
Status Code