Dell POWEREDGE M1000E - Manual (Page 375)

Fabric OS Message Reference 299
53-1001767-01
FW-1124
42
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1124
Message
, [FW-1124], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .
Probable Cause Indicates that the number of domain ID changes has changed from a value outside of the
acceptable range to a value within the acceptable range. Domain ID changes occur when there is a
conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to
the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1125
Message
, [FW-1125], ,, INFO, , , value
has changed(High=, Low=). Current value is .
Probable Cause Indicates that the number of segmentations has changed. Segmentation changes might occur due
to:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1126
Message
, [FW-1126], ,, INFO, , , is
below low boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of segmentations has fallen below the low boundary. Segmentation
changes might occur due to:
• Zone conflicts.