Dell POWEREDGE M1000E - Manual (Page 391)

Fabric OS Message Reference 315
53-1001767-01
FW-1194
42
Severity INFO
FW-1194
Message
, [FW-1194], ,, WARNING, , ,
, is above high boundary(High=, Low=). Current value
is .
Probable Cause Indicates that the number of state changes that the port experiences has risen above the high
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity WARNING
FW-1195
Message
, [FW-1195], ,, INFO, , ,
, is between high and low boundaries(High=, Low=).
Current value is .
Probable Cause Indicates that the number of state changes that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. The state of the port has
changed for one of the following reasons: the port has gone offline, has come online, is testing, is
faulty, has become an E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1196
Message
, [FW-1196], ,, INFO, , ,
, value has changed(High=, Low=). Current value is
.
Probable Cause Indicates that the number of link resets that the port experiences has changed. Link resets occur
due to link timeout errors that indicate no frame activity at all.
Recommended
Action
Check both ends of your cable connection. Verify if the cable and small form-factor pluggables
(SFPs) are faulty.
Severity INFO