Dell POWEREDGE M1000E - Manual (Page 449)

Fabric OS Message Reference 373
53-1001767-01
HIL-1206
45
HIL-1206
Message
, [HIL-1206], ,, ERROR, , Fan
number> sensor , speed ( RPM) below threshold.
Probable Cause Indicates that the specified fan speed (in RPMs) has fallen below the minimum threshold. This
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches
and is not applicable to the Brocade 24000 or 48000.
Recommended
Action
For the Brocade 4100, 4900, 7500, and AP7600, replace the fan field-replaceable unit (FRU).
Severity ERROR
HIL-1207
Message
, [HIL-1207], ,, ERROR, , Fan
number> is faulty.
Probable Cause Indicates that the fan is faulty.
Recommended
Action
Use the tempShow command to verify that the switch temperatures are within operational ranges.
Refer to the hardware reference manual for the temperature range of your switch.
Make sure that the area is well-ventilated and that the room temperature is within operational
range of your switch. Refer to the hardware reference manual for your switch for the operational
temperature range.
Use the fanShow command to monitor the status of the fan generating this error.
If the fan continues to generate this message, replace the switch because the fan is not
field-replaceable.
Severity ERROR
HIL-1208
Message
, [HIL-1208], ,, INFO, , Fan
number> is not faulty.
Probable Cause Indicates that the fan is not faulty.
Recommended
Action
This can only occur on switches with non-removable fans. It follows a previous indication of
faultiness.
If the fan continues to generate this message, it indicates oscillation between faulty and non-faulty
behavior. Replace the switch because the fan is not field-replaceable.
Severity INFO