Sec-1302, Sec-1303, Sec-1304 – Dell POWEREDGE M1000E User Manual
Page 625: Sec-1305
Fabric OS Message Reference
549
53-1001767-01
SEC-1302
90
SEC-1302
Message
does not have all the required PKI objects correctly installed.
Probable Cause
Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity
INFO
SEC-1303
Message
version does not support security.
Probable Cause
Indicates the currently installed software version does not support the Brocade Secure Fabric OS
feature.
Recommended
Action
Run the firmwareDownload command to update the firmware to the latest version for your specific
switch. Verify the firmware you are installing supports the Brocade Secure Fabric OS feature.
Severity
INFO
SEC-1304
Message
no security license.
Probable Cause
Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for
that specific switch.
Severity
INFO
SEC-1305
Message
no zoning license.