Dell POWEREDGE M1000E - Manual (Page 317)

Fabric OS Message Reference 241
53-1001767-01
FICN-1007
35
FICN-1007
Message
, [FICN-1007], ,, ERROR, ,
DevDiskEgr:FICON Selective Reset:Path=
DeviceDomain> State=0x
State> stat_array=0x.
Probable Cause Indicates a Selective Reset from the channel was received as either a normal part of path recovery
or starting sequence in an error case.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support.
Severity ERROR
FICN-1008
Message
, [FICN-1008], ,, ERROR, ,
DevDiskEgr:FICON Purge Path received Path=
DeviceDomcontactain> .
Probable Cause Indicates a FICON Purge Path was received from the channel as a part of path recovery.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity ERROR
FICN-1009
Message
, [FICN-1009], ,, INFO, ,
DevIng:CmdReject Sense Data rcvd:Path=
DeviceDomain>
LastCmds= Sense Data:Bytes0-0xB=
0-3 of sense data from the device>
.
Probable Cause Indicates a Unit Check status was received from a device and a sense command was issued to
read the sense data.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity INFO
FICN-1010
Message
, [FICN-1010], ,, INFO, ,
DevDiskEgr:Device level exception flag found for Path=
HostPort DeviceDomain>8X8X: Oxid=0x
that was reported in the Device Level Exception Frame>4X.