Sec-1195, Sec-1196, Sec-1197 – Dell POWEREDGE M1000E User Manual
Page 621: Sec-1198

Fabric OS Message Reference
545
53-1001767-01
SEC-1195
90
SEC-1195
Message
has no
Probable Cause
Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity
WARNING
SEC-1196
Message
not have all default account names.
Probable Cause
Indicates the default switch accounts admin and user do not exist on the switch when enabling
security.
Recommended
Action
Reset the default admin and user account names on the switch that reported the warning and retry
enabling security.
Severity
WARNING
SEC-1197
Message
Probable Cause
Indicates the specified account has changed.
Recommended
Action
No action is required.
Severity
INFO
SEC-1198
Message
violation: Unauthorized host with IP address
tries to establish API
connection.
Probable Cause
Indicates an API security violation was reported. The specified unauthorized host attempted to
establish an API connection.