Dell POWEREDGE M1000E - Manual (Page 618)

542 Fabric OS Message Reference
53-1001767-01
SEC-1186
90
Probable Cause Indicates the switch database was enabled or disabled as the secondary authentication,
accounting, and authorization (AAA) mechanism when the Remote Authentication Dial-in User
Service (RADIUS) / Lightweight Directory Access Protocol (LDAP) is the primary AAA mechanism
Recommended
Action
No action is required.
Severity INFO
SEC-1186
Message
, [SEC-1186], ,, INFO, ,
Configuration.
Probable Cause Indicates the remote authentication dial-in user service (RADIUS/LDAP) configuration was enabled
or disabled as the primary authentication, accounting, and authorization (AAA) mechanism.
Recommended
Action
No action is required.
Severity INFO
SEC-1187
Message
, [SEC-1187], ,, INFO, , Security
violation: Unauthorized switch tries to join fabric.
Probable Cause Indicates a switch connection control (SCC) security violation was reported. The specified
unauthorized switch attempts to join the fabric.
Recommended
Action
Check the switch connection control policy (SCC) policy to verify the switches allowed in the fabric.
If the switch should be allowed in the fabric but it is not included in the SCC policy, add the switch
to the policy. If the switch is not allowed access to the fabric, this is a valid violation message and
an unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your
enterprise security policy.
Severity INFO
SEC-1188
Message
, [SEC-1188], ,, INFO, , Security
violation: Unauthorized device tries to FLOGI to index/area
of switch .
Probable Cause Indicates a device connection control (DCC) security violation was reported. The specified device
attempted to login using fabric login (FLOGI) to an unauthorized port. The DCC policy correlates
specific devices to specific port locations. If the device changes connected port, the device will not
be allowed to login.