beautypg.com

Auth-1034, Auth-1035, Auth-1036 – Dell POWEREDGE M1000E User Manual

Page 124

background image

48

Fabric OS Message Reference

53-1001767-01

AUTH-1034

4

Recommended

Action

Add the entity's world wide name (WWN) to the SCC policy and reinitialize authentication by using
the portDisable and portEnable commands or the switchDisable and switchEnable commands.

Severity

ERROR

AUTH-1034

Message

, [AUTH-1034], ,, ERROR, , Failed to

validate name in : port .

Probable Cause

Indicates that the specified entity name in the payload is not in the correct format.

Recommended

Action

Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.

If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.

Severity

ERROR

AUTH-1035

Message

, [AUTH-1035], ,, ERROR, , Invalid

type> length in message: length , port .

Probable Cause

Indicates that a particular data field in the authentication message has an invalid length field. This
error usually relates to internal failure.

Recommended

Action

Usually this problem is transient. The authentication might fail.

Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.

If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.

Severity

ERROR

AUTH-1036

Message

, [AUTH-1036], ,, ERROR, , Invalid state

for : port .

Probable Cause

Indicates that the switch received an unexpected authentication message.

Recommended

Action

Usually this problem is transient. The authentication might fail.

Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.

If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.