Dell POWEREDGE M1000E - Manual (Page 337)

Fabric OS Message Reference 261
53-1001767-01
FICN-1076
35
Severity INFO
FICN-1076
Message
, [FICN-1076], ,, INFO, ,
HostTapeIngr:ReadCpReport:Path=
:Emuls=0x
state transitions while this tape was loaded>:Cmds=0x
read commands processed while this tape was loaded>:Chains=0x
emulated host chains processed while this tape was loaded>:MBytes=
emulated read megabytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and Read
Channel Program pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1077
Message
, [FICN-1077], ,, INFO, ,
DevTapeEgr:Unloaded:Path=
:states=0x<4 prior emulation
states>:cmds=0x
device>:status=0x
device>:flags=0x
Loaded,0x40-WriteEmul,0x20-RdBlkEmul,0x10-RdCpEmul)>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR, which
indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
Severity INFO
FICN-1078
Message
, [FICN-1078], ,, INFO, ,
DevTapeEgr:ReadBlkReport:Path=
:Emuls=0x
state transitions while this tape was loaded>:Cmds=0x
write commands processed while this tape was loaded>:Chains=0x
emulated host chains processed while this tape was loaded>:MBytes=
emulated write megabytes processed while this tape was loaded>
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and write
pipelining was performed on the currently loaded tape.