Dell POWEREDGE M1000E - Manual (Page 366)

290 Fabric OS Message Reference
53-1001767-01
FW-1035
42
FW-1035
Message
, [FW-1035], ,, WARNING, , , is
above high boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has risen above the high
boundary. Frequent fluctuations in temperature might indicate a deteriorating SFP.
Recommended
Action
Replace the SFP.
Severity WARNING
FW-1036
Message
, [FW-1036], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .
Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has changed from a value
outside of the acceptable range to a value within the acceptable range. Frequent fluctuations in
temperature might indicate a deteriorating SFP.
Recommended
Action
No action is required.
Severity INFO
FW-1037
Message
, [FW-1037], ,, INFO, , , value
has changed(High=, Low=). Current value is .
Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The
receive performance area measures the amount of incoming laser to help you determine if the SFP
is in good working condition or not. If the counter often exceeds the threshold, the SFP is
deteriorating.
Recommended
Action
Incoming laser fluctuations usually indicate a deteriorating SFP. If this message occurs repeatedly,
replace the SFP.
Severity INFO
FW-1038
Message
, [FW-1038], ,, WARNING, , , is
below low boundary(High=, Low=). Current value is
.