Dell POWEREDGE M1000E - Manual (Page 425)

Fabric OS Message Reference 349
53-1001767-01
FW-1513
42
Probable Cause Indicates that the number of link failures that the port experiences has changed and dropped
below upper threshold boundary to a value within the acceptable range. Link loss errors occur
when a link experiences a loss of signal and fails. Both physical and hardware problems can cause
link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for
concurrent loss of synchronization errors and, if applicable, troubleshoot them.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1513
Message
, [FW-1513], ,, INFO, , ,
, has crossed lower threshold boundary threshold boundary to in
between(High=, Low=). Current value is .
Probable Cause Indicates that the number of synchronization losses that the port experiences has changed and
crossed lower threshold boundary to a value within the acceptable range. Loss of synchronization
errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses
often create synchronization losses.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1514
Message
, [FW-1514], ,, INFO, , ,
, has dropped below upper threshold boundary to in between(High=
value>, Low=). Current value is .
Probable Cause Indicates that the number of synchronization losses that the port experiences has changed and
dropped below upper threshold boundary to a value within the acceptable range. Loss of
synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable.
Signal losses often create synchronization losses.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1515
Message
, [FW-1515], ,, INFO, , ,
, has crossed lower threshold boundary to in between(High=,
Low=). Current value is .