Dell POWEREDGE M1000E - Manual (Page 390)

314 Fabric OS Message Reference
53-1001767-01
FW-1191
42
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1191
Message
, [FW-1191], ,, INFO, , ,
, is between high and low boundaries(High=, Low=).
Current value is .
Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has changed from a
value outside of the acceptable range to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1192
Message
, [FW-1192], ,, INFO, , ,
, value has changed(High=, Low=). Current value is
.
Probable Cause Indicates that the number of state changes that the port experiences has changed. The state of the
port has changed for one of the following reasons: the port has gone offline, has come online, is
testing, is faulty, has become an E_Port, has become an F_Port, has segmented, or has become a
trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1193
Message
, [FW-1193], ,, INFO, , ,
, is below low boundary(High=, Low=). Current value
is .
Probable Cause Indicates that the number of state changes that the port experiences has fallen below the low
boundary. The state of the port has changed for one of the following reasons: the port has gone
offline, has come online, is testing, is faulty, has become an E_Port, has become an F_Port, has
segmented, or has become a trunk port.
A low number of port state changes means that the switch is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.