Dell POWEREDGE M1000E - Manual (Page 538)

462 Fabric OS Message Reference
53-1001767-01
PDM-1011
75
PDM-1011
Message
, [PDM-1011], ,, WARNING, , File read
failed: , Length(read=, expected=
characters expected>), errno=.
Probable Cause Indicates the parity data manager (PDM) process could not read data from the specified file.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1012
Message
, [PDM-1012], ,, WARNING, , File write
failed: . Length(read=, write=
characters written>), errno=.
Probable Cause Indicates the parity data manager (PDM) process could not write data to the specified file.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1013
Message
, [PDM-1013], ,, WARNING, , File empty:
Probable Cause Indicates the switch configuration file /etc/fabos/fabos.[0|1].conf is empty.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1014
Message
, [PDM-1014], ,, WARNING, , Access
sysmod failed.
Probable Cause Indicates a system call to sysMod failed.