Dell POWEREDGE M1000E - Manual (Page 318)

242 Fabric OS Message Reference
53-1001767-01
FICN-1011
35
Probable Cause Indicates a Device Level Exception frame was received from the FICON Channel.
Recommended
Action
If there was a job or IO failure associated with this event, please contact your vendor's customer
support for assistance.
Severity INFO
FICN-1011
Message
, [FICN-1011], ,, ERROR, ,
DevDiskIng:XRC Incorrect RRS SeqNum Rcvd Path=0x
DeviceDomain>8X8X Expected=0x
number that was expected from the device>4X Received=0x
that was actually received from the device>4X Oxid=0x4X.
Probable Cause Indicates the Control Unit/device presented a Read Record Set Sequence number different from
the SDM's expected sequence number.
Recommended
Action
If there was an XRC volume or session suspended associated with this event, please contact your
vendor's customer support for assistance.
Severity ERROR
FICN-1012
Message
, [FICN-1012], ,, ERROR, ,
DevDiskIng:Device level exception found for Path=0x
HostPort DeviceDomain>8X8X: Oxid=0x
that was reported in the Device Level Exception Frame>4X.
Probable Cause Indicates a Device Level Exception frame received from the FICON DASD Control Unit.
Recommended
Action
If there was a job or IO failure associated with this event, please contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1013
Message
, [FICN-1013], ,, INFO, ,
DevDiskIng:Status=0x
state>2X received in odd state=0x2X from
Path=0x8X
DeviceAddr>8X sent LBY.
Probable Cause Indicates that when the device sent the status in an incorrect state, the emulation processing
rejected the status with an LBY frame.
Recommended
Action
If there was a job or IO failure associated with this event, please contact your vendor's customer
support for assistance.