Dell POWEREDGE M1000E - Manual

I/O Module Installation Order
Guidelines
When installing I/O modules or blanks in the I/O module bays in the back of
your system enclosure, you must install them in right-to-left order:
• A module (or blank) must be installed in bay A2, then bay B2, then bay C2.
• Next, a module (or blank) must be installed in bay C1, then bay B1, then
bay A1.
For detailed information on installing the I/O modules in your system, see
"Guidelines for Installing I/O Modules" and "Installing I/O Modules" in your
Hardware Owner’s Manual.
Figure 1. I/O Module Bay Numbering
A1 B1 C1 C2 B2 A2
January 2008
U431Dam0.fm Page 9 Monday, January 21, 2008 10:36 AM