Sec-1016, Sec-1022, Sec-1024 – Dell POWEREDGE M1000E User Manual
Page 582

506
Fabric OS Message Reference
53-1001767-01
SEC-1016
90
Recommended
Action
Resolve the above specifed error by executing the command only from Primary FCS.
Severity
ERROR
SEC-1016
Message
violation: Unauthorized host with IP address
tries to establish SSH connection.
Probable Cause
Indicates a security violation was reported. The IP address of the unauthorized host is displayed in
the message.
Recommended
Action
Check for unauthorized access to the switch through the SSH connection.
Severity
INFO
SEC-1022
Message
PKI objects.
Probable Cause
Indicates the fabric has failed to generate or validate either the public or private key pair or the
certificate signing request (CSR).
Recommended
Action
Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the
Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the
certificate by following the field upgrade process.
Severity
WARNING
SEC-1024
Message
security database is too large to fit in flash.
Probable Cause
Indicates the size of the security database is too large for the flash memory. The size of the security
database increases with the number of entries in each policy.
Recommended
Action
Reduce the size of the security database by reducing the number of entries within each policy.
Severity
INFO