beautypg.com

Sec-3039, Sec-3044, Sec-3045 – Dell POWEREDGE M1000E User Manual

Page 799: Sec-3046

background image

Fabric OS Message Reference

723

53-1001767-01

SEC-3039

125

SEC-3039

Message

AUDIT, , [SEC-3039], INFO, SECURITY, ,

, , Event: Securty Violation, Status: failed, Info: Unauthorized

host with IP address tries to establish

connection using .

Probable Cause

Indicates a security violation was reported. The IP address of the unauthorized host is displayed in
the message.

Recommended

Action

Check for unauthorized access to the switch through the specified protocol connection. Take
appropriate action as defined by your enterprise security policy.

Severity

INFO

SEC-3044

Message

AUDIT, , [SEC-3044], INFO, SECURITY, ,

, FIPS mode has been changed to .

Probable Cause

Indicates there was a change in the FIPS mode.

Recommended

Action

Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.

Severity

INFO

SEC-3045

Message

AUDIT, , [SEC-3045], INFO, SECURITY, ,

, System has been zeroized.

Probable Cause

Indicates the system has been zeroized.

Recommended

Action

Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.

Severity

INFO

SEC-3046

Message

AUDIT, , [SEC-3046], INFO, SECURITY, ,

, FIPS self tests mode has been set to .

Probable Cause

Indicates there was a change in the FIPS Self Test mode.