Dell POWEREDGE M1000E - Manual (Page 265)

Fabric OS Message Reference 189
53-1001767-01
Chapter
27
FABS System Messages
FABS-1001
Message
, [FABS-1001], , FFDC, CRITICAL, ,
Probable Cause Indicates that the system is low on memory and cannot allocate more memory for new operations.
This is usually an internal Fabric OS problem or file corruption. Description of memory need
indicates how much memory was being requested. The value could be any whole number.
Recommended
Action
Reboot or power cycle the switch.
Severity CRITICAL
FABS-1002
Message
, [FABS-1002], ,, WARNING, ,
name>
Probable Cause Indicates that an internal problem has been detected by the software. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1004
Message
, [FABS-1004], ,, WARNING, ,
name and description of problem> process (
name>)
Probable Cause Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING