Dell POWEREDGE M1000E - Manual (Page 719)

Fabric OS Message Reference 643
53-1001767-01
Chapter
105
UCST System Messages
UCST-1003
Message
, [UCST-1003], ,, INFO, , Duplicate Path
to Domain , Output Port = , PDB pointer = 0x
Probable Cause Indicates the duplicate paths were reported to the specified domain from the specified output port.
The path database (PDB) pointer is the address of the path database and provides debugging
information.
Recommended
Action
No action is required.
Severity INFO
UCST-1007
Message
, [UCST-1007], , FFDC, CRITICAL, ,
Inconsistent route detected: Port = , should be
Probable Cause Indicates the switch detected an inconsistency in the routing database between the routing
protocol and the hardware configuration. The first port number displayed is what the hardware has
configured and the second port number displayed is what the protocol is using.
Recommended
Action
Run the switchDisable command and then the switchEnable command to reset the routing
database. Run the uRouteShow command to display the new routing tables.
Severity CRITICAL
UCST-1020
Message
, [UCST-1020], ,, WARNING, , Static
route (input-area: , domain: output-area: )
has been ignored due to platform limitation.
Probable Cause Indicates the configured static route cannot be applied to the routing database due to a platform
limitation.
Recommended
Action
No action is required.
Severity WARNING