Ms-1009, Ms-1021, Ms-1022 – Dell POWEREDGE M1000E User Manual
Page 514

438
Fabric OS Message Reference
53-1001767-01
MS-1009
69
MS-1009
Message
Switch Port ID is
Probable Cause
Indicates a registered link incident record (RLIR) has been generated for one of the actions
indicated by the
The following messages will be displayed:
•
Exceeded bit error rate threshold
•
Loss of signal or synchronization
•
Not operational seq. recognized
•
Primitive sequence timeout
•
Unrecognized link incident
Recommended
Action
Persistent RLIR incidents are likely the result of SAN hardware problems such as bad cables or
small form-factor pluggables (SFPs). It may be necessary to replace hardware if these messages
persist.
Severity
ERROR
MS-1021
Message
failure(FSS_MS_WARMINIT failed. Reason=
Probable Cause
Indicates the Fabric OS state synchronization (FSS) warm recovery failed during the WARM INIT
phase of a reboot.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
MS-1022
Message
Server Platform Service
Probable Cause
Indicates Management Server Platform Service is being activated or deactivated.
Recommended
Action
No action is required.
Severity
INFO