Dell POWEREDGE M1000E - Manual (Page 269)

Fabric OS Message Reference 193
53-1001767-01
FABS-1015
27
Severity ERROR
FABS-1015
Message
, [FABS-1015], ,, ERROR, ,
name>[]:Request to enable FRU type 0x, unit
failed. err code
Probable Cause Indicates the specified FRU could not be enabled. This is usually an internal Fabric OS problem.
Recommended
Action
Try removing and reinserting the FRU.
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR