Dell POWEREDGE M1000E - Manual (Page 377)

Fabric OS Message Reference 301
53-1001767-01
FW-1129
42
Severity INFO
FW-1129
Message
, [FW-1129], ,, INFO, , , value
has changed(High=, Low=). Current value is .
Probable Cause Indicates that the number of zone changes has changed. Zone changes occur when there is a
change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1130
Message
, [FW-1130], ,, INFO, , , is
below low boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur
when there is a change to the effective zone configuration. A low number of zone configuration
changes means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1131
Message
, [FW-1131], ,, INFO, , , is
above high boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of zone changes has risen above the high boundary. Zone changes occur
when there is a change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1132
Message
, [FW-1132], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .