Dell POWEREDGE M1000E - Manual (Page 238)

162 Fabric OS Message Reference
53-1001767-01
EM-1051
22
EM-1051
Message
, [EM-1051], ,, INFO, , :
Inconsistency detected, FRU re-initialized.
Probable Cause Indicates that an inconsistent state was found in the field-replaceable unit (FRU). This occurs if the
state of the FRU was changing during a failover. The FRU is reinitialized and traffic might have been
disrupted.
Recommended
Action
No action is required.
Severity INFO
EM-1057
Message
, [EM-1057], ,, WARNING, , Blade:
Id> is getting reset:.
Probable Cause Indicates the blade is being automatically reset because of known resetable transient errors such
as an application-specific integrated circuit (ASIC) parity error.
Recommended
Action
No action is required if the switch does not reach the reset threshold for the switch or blade. If the
reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be
replaced.
Severity WARNING
EM-1058
Message
, [EM-1058], ,, WARNING, , Switch gets
reset:
Probable Cause Indicates the switch is being automatically reset because of a known resetable transient problem
such as an application-specific integrated circuit (ASIC) parity error.
Recommended
Action
No action is required if the switch does not reach the reset threshold for the switch or blade. If the
reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be
replaced.
Severity WARNING
EM-1059
Message
, [EM-1059], , FFDC, ERROR, ,
number or Switch> with id cannot be found in the fru description xml
file.
Probable Cause Indicates that a blade inserted in the specified slot or the switch (for nonbladed switches) is not
compatible with the switch configuration software. The system may not be usable.