Dell POWEREDGE M1000E - Manual (Page 365)

Fabric OS Message Reference 289
53-1001767-01
FW-1012
42
Recommended
Action
Set the high boundary above the normal operation range.
Severity INFO
FW-1012
Message
, [FW-1012], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .
Probable Cause Indicates that the power supply counter changed from a value outside of the acceptable range to a
value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1033
Message
, [FW-1033], ,, INFO, , , value
has changed(High=, Low=). Current value is .
Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has changed. Frequent
fluctuations in SFP temperature might indicate a deteriorating SFP.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1034
Message
, [FW-1034], ,, WARNING, , , is
below low boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has fallen below the low
boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity WARNING