Dell POWEREDGE M1000E - Manual (Page 735)

Fabric OS Message Reference 659
53-1001767-01
ZONE-1007
111
ZONE-1007
Message
, [ZONE-1007], ,, INFO, ,
Ioctl() in () at port () returns code
() and reason string ().
Probable Cause Indicates that frame filter logic reported a failure during one of the IOCTL calls. The IOCTL call from
which the failure is reported is listed as part of the error message. This is usually a programming
error when adding content-addressable memory (CAM) entries before the filter setup.
Recommended
Action
There are two ways to avoid this problem.
• Avoid having too many hosts zoned with a set of target devices at a single port.
• Avoid having too many zones directed at a single port group on the switch.
Severity INFO
ZONE-1008
Message
, [ZONE-1008], ,, WARNING, , WARNING -
port Out of CAM entries.
Probable Cause Indicates the total number of entries of S_ID CAM is above the limit while creating or adding a zone
group. The maximum number of content-addressable memory (CAM) entries allowed depends on
the application-specific integrated circuit (ASIC).
Recommended
Action
If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that
port.
Severity WARNING
ZONE-1010
Message
, [ZONE-1010], ,, WARNING, , WARNING -
Duplicate entries in zone() specification.
Probable Cause Indicates there are duplicate entries in a zone object. A zone object member is specified twice in a
given zone object. This message occurs only when enabling a zone configuration.
Recommended
Action
Check the members of the zone and delete the duplicate member.
Severity WARNING
ZONE-1012
Message
, [ZONE-1012], ,, WARNING, , WARNING -
All ports are offline.
Probable Cause Indicates that all the ports in a zone are offline.