Dell POWEREDGE M1000E - Manual (Page 296)

220 Fabric OS Message Reference
53-1001767-01
FCR-1021
34
3. Use Zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge
fabrics.
4. Run portEnable on each EX_Port, one at a time, and verify that this error is not reported again.
Severity WARNING
FCR-1021
Message
, [FCR-1021], ,, WARNING, , Local LSAN
device entries exhausted.
Probable Cause Indicates that the number of devices created through logical storage area network (LSAN) zones
within the MetaSAN exceeds the local LSAN zone database limitations.
Recommended
Action
Remove excess device entries within LSAN zones so that the number of devices is within the range
of the local zone database limitations.
Severity WARNING
FCR-1022
Message
, [FCR-1022], ,, ERROR, , Local proxy
device slot entries exhausted.
Probable Cause Indicates that the resources used to persistently store the proxy device slot to the remote world
wide name (WWN) have been consumed.
Recommended
Action
Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by
removing logical storage area network (LSAN) zone entries.
Severity ERROR
FCR-1023
Message
, [FCR-1023], ,, WARNING, , Local
phantom port WWN entries exhausted.
Probable Cause Indicates that the number of port world wide names (WWNs) in use exceeds the local port WWN
resources.
Recommended
Action
Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which
limits the number of translate domains). You can also limit the number of proxy devices for a
translate domain (which limits the number of translate domain ports required) by limiting the
devices specified in logical storage area network (LSAN) zones.
Severity WARNING