Fabr-1010, Fabr-1011, Fabr-1012 – Dell POWEREDGE M1000E User Manual
Page 254

178
Fabric OS Message Reference
53-1001767-01
FABR-1010
26
Recommended
Action
The fabric daemon will discard the EFP. The system will recover through the EFP retrial process.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1010
Message
description>. Probable Cause Indicates that the errors occurred while cleaning up the request domain ID (RDI). The error Recommended Action If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Severity WARNING FABR-1011 Message description>. Probable Cause Indicates that the Fabric OS is unable to inform the Fabric OS State Synchronization Management Recommended Action If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Severity ERROR FABR-1012 Message stream>: no such type, Probable Cause Indicates that the fabric is not in the appropriate state for the specified process. This message is Recommended Action The fabric daemon will take proper action to recover from the error. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Severity WARNING
description provides further details. This message is rare and usually indicates a problem with the
Fabric OS.
supportSave command and contact your switch service provider.
module (FSSME) that the fabric is stable or unstable. This message is rare and usually indicates a
problem with the Fabric OS.
supportSave command and contact your switch service provider.
rare and usually indicates a problem with the Fabric OS.
supportSave command and contact your switch service provider.