Dell POWEREDGE M1000E - Manual (Page 415)

Fabric OS Message Reference 339
53-1001767-01
FW-1402
42
FW-1402
Message
, [FW-1402], ,, WARNING, , , is
above high boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the flash usage percentage has risen above the high boundary. Flash increases and
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to
future problems.
Recommended
Action
You might have to remove some unwanted files to create some flash space. Run the supportSave
command to remove files from the kernel space.
Severity WARNING
FW-1403
Message
, [FW-1403], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .
Probable Cause It means some process is using more memory or cpu.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1404
Message
, [FW-1404], ,, WARNING, , ,is
above high boundaries(High=, Low=). Current value is
.
Probable Cause It means CPU or memory usage is above its threshold. If this RASLOG is pertaining to memory
usage then the usage is above middle memory threshold.
Recommended
Action
No action is required.
Severity WARNING
FW-1405
Message
, [FW-1405], ,, INFO, , ,is above
high boundary(High=, Low=). Current value is
.
Probable Cause It means memory usage below low threshold.