Dell POWEREDGE M1000E - Manual (Page 267)

Fabric OS Message Reference 191
53-1001767-01
FABS-1008
27
Severity WARNING
FABS-1008
Message
, [FABS-1008], ,, WARNING, ,
name> : Media oid mapping failed
Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING
FABS-1009
Message
, [FABS-1009], ,, WARNING, ,
name> : type is not media
Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING
FABS-1010
Message
, [FABS-1010], ,, WARNING, ,
name>: Wrong media_event
Probable Cause Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1011
Message
, [FABS-1011], ,, ERROR, ,
name>[]:Invalid input state 0x
Probable Cause Indicates an unrecognized state code was used in an internal Fabric OS message for a FRU.