Dell POWEREDGE M1000E - Manual (Page 130)

54 Fabric OS Message Reference
53-1001767-01
ANV-1004
5
ANV-1004
Message
, [ANV-1004], ,, ERROR, ,
number>,: Invalid DMA ch pointer, chan:,
good_addr:0x bad_addr:0x.
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may
degrade data traffic.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the blade.
Severity ERROR
ANV-1005
Message
, [ANV-1005], ,, ERROR, ,
number>,,: Memory allocation failed.
Probable Cause Indicates the memory allocation failure in the software.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the CP blade.
Severity ERROR
ANV-1006
Message
, [ANV-1006], ,, CRITICAL, ,
number>,: HW ASIC Chip fault. Type = 0x, Error =
.
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that renders
the chip as not operational.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the blade.
Severity CRITICAL
ANV-1007
Message
, [ANV-1007], ,, CRITICAL, ,
number>,: ANVIL PASS 1 low buff pool fault:
0x.
Probable Cause Indicates that Anvil Pass 1 is out of free buffer which might cause a chip fault.
Recommended
Action
Reconfigure the testing setup.