Isns-1009, Isns-1010, Isns-1011 – Dell POWEREDGE M1000E User Manual
Page 485: Isns-1013

Fabric OS Message Reference
409
53-1001767-01
ISNS-1009
56
Recommended
Action
No action is required. You may change the configuration and retry the peering with the external
iSNS server.
Severity
INFO
ISNS-1009
Message
external iSNS server
targets found.
Probable Cause
Indicates that no virtual targets were found, so peering was not started.
Recommended
Action
No action is required. Peering will resume automatically when virtual targets are detected.
Severity
INFO
ISNS-1010
Message
Probable Cause
Indicates the slot or port is out of range.
Recommended
Action
Retry with a valid slot or port. Refer to the appropriate hardware reference manual for valid slot and
port ranges.
Severity
WARNING
ISNS-1011
Message
Service is
Probable Cause
Indicates the current state of the internet storage name services (iSNS) client is either enabled or
disabled.
Recommended
Action
No action is required. Use the fosConfig command to display, enable, or disable the iSNS client
service.
Severity
INFO
ISNS-1013
Message
connection failure.