Dell POWEREDGE M1000E - Manual (Page 744)

668 Fabric OS Message Reference
53-1001767-01
ZONE-1045
111
ZONE-1045
Message
, [ZONE-1045], ,, INFO, , The Default
Zone access mode is already set to No Access.
Probable Cause Indicates that the Default Zone access mode is already set to No Access.
Recommended
Action
No action is required.
Severity INFO
ZONE-1046
Message
, [ZONE-1046], ,, INFO, , The Default
Zone access mode is already set to All Access.
Probable Cause Indicates the Default Zone access mode is already set to All Access.
Recommended
Action
No action is required.
Severity INFO
ZONE-1047
Message
, [ZONE-1047], ,, INFO, , Switch domain
() does not support defined database.
Probable Cause Indicates a remote Brocade switch is running a downlevel version of Fabric OS that does not
support the defined database.
Recommended
Action
It is recommended to upgrade all switches to the same release level version.
Severity INFO
ZONE-1048
Message
, [ZONE-1048], ,, WARNING, , SZONE ACA
is rejected on the standby.
Probable Cause Indicates that the standby zoning component has not received a syncdump command from the
primary side.
Recommended
Action
Synchronize the standby CP.
Severity WARNING