Dell POWEREDGE M1000E - Manual (Page 368)

292 Fabric OS Message Reference
53-1001767-01
FW-1042
42
Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed. The
transmit performance area measures the amount of outgoing laser to help you determine if the
SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is
deteriorating.
Recommended
Action
Transmitting laser fluctuations usually indicate a deteriorating SFP. If this message occurs
repeatedly, replace the SFP.
Severity INFO
FW-1042
Message
, [FW-1042], ,, WARNING, , , is
below low boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below
the low boundary. The transmit performance area measures the amount of outgoing laser to help
you determine if the SFP is in good working condition or not. If the counter often exceeds the
threshold, the SFP is deteriorating.
Recommended
Action
Verify that your optical components are clean and function properly. Replace deteriorating cables
or SFPs. Check for damage from heat or age.
Severity WARNING
FW-1043
Message
, [FW-1043], ,, WARNING, , , is
above high boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has risen above
the high boundary. The transmit performance area measures the amount of outgoing laser to help
you determine if the SFP is in good working condition or not. If the counter often exceeds the
threshold, the SFP is deteriorating.
Recommended
Action
Replace the SFP.
Severity WARNING
FW-1044
Message
, [FW-1044], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .