Dell POWEREDGE M1000E - Manual (Page 408)

332 Fabric OS Message Reference
53-1001767-01
FW-1357
42
Severity INFO
FW-1357
Message
, [FW-1357], ,, INFO, , , is
below low boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of authentication failures has fallen below the low boundary.
Authentication failures can occur for many reasons. The switch on the other side might not support
the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The
port where authentication fails is segmented. This counter keeps track of the number of
authentication failures.
Recommended
Action
No action is required.
Severity INFO
FW-1358
Message
, [FW-1358], ,, WARNING, , , is
above high boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of authentication failures has risen above the high boundary.
Authentication failures can occur for many reasons. The switch on the other side might not support
the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The
port where authentication fails is segmented. This counter keeps track of the number of
authentication failures.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity WARNING
FW-1359
Message
, [FW-1359], ,, INFO, , , is
between high and low boundaries(High=, Low=). Current value
is .
Probable Cause Indicates that the number of authentication failures has changed from a value outside of the
acceptable range to a value within the acceptable range. Authentication failures can occur for
many reasons. The switch on the other side might not support the protocol, have an invalid
certificate, not be signed properly or send unexpected packets. The port where authentication fails
is segmented. This counter keeps track of the number of authentication failures.
Recommended
Action
No action is required.