Sec-1313, Sec-1314, Sec-1315 – Dell POWEREDGE M1000E User Manual
Page 628

552
Fabric OS Message Reference
53-1001767-01
SEC-1313
90
Probable Cause
Indicates the passwdCfg parameters changed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity
INFO
SEC-1313
Message
parameters were set to default values.
Probable Cause
Indicates the passwdCfg parameters were set to default values.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity
INFO
SEC-1314
Message
Address Description > IP address from EM failed. Probable Cause Indicates the call to the EM module to retrieve the IP address failed. Recommended Action Restart the system to fix this error. If the problem persists contact your switch service provider. Severity ERROR SEC-1315 Message command > command failed - configured for rejection on this switch Probable Cause Indicates there was an attempt to distribute databases to a switch that was configured not to Recommended Action Verify the accept distribution configuration for the listed databases. Use the fddCfg command to Severity ERROR dbs
accept distributions from the fabric.
verify and correct the configuration if necessary.