Sec-1171, Sec-1172, Sec-1173 – Dell POWEREDGE M1000E User Manual
Page 615: Sec-1174

Fabric OS Message Reference
539
53-1001767-01
SEC-1171
90
SEC-1171
Message
secure mode due to invalid security object.
Probable Cause
Indicates the switch is segmented, and secure mode is disabled on the switch because there was
no license present or no public key infrastructure (PKI) objects.
Recommended
Action
Run the pkiShow command to determine whether all PKI objects exist. If they do not exist, run the
pkiCreate command to create them for the switch.
Run the licenseAdd command to install the required license key. Refer to your switch supplier to
obtain a license if you do not have one.
Severity
ERROR
SEC-1172
Message
identify role.
Probable Cause
Indicates the switch is unable to determine its role (primary FCS or backup FCS) in the secure
fabric.
Recommended
Action
Verify all switches in the fabric are in time synchronization with the primary and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity
ERROR
SEC-1173
Message
with Primary FCS switch.
Probable Cause
Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the
secure fabric. This could be due to the primary FCS being disabled.
Recommended
Action
If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Severity
ERROR
SEC-1174
Message
Probable Cause
Indicates the FCS or non-FCS password could not be set.