Dell POWEREDGE M1000E - Manual (Page 404)

328 Fabric OS Message Reference
53-1001767-01
FW-1340
42
Probable Cause Indicates that the number of device cable connection (DCC) violations has changed from a value
outside of the acceptable range to a value within the acceptable range. DCC violations indicate that
an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules
for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC
policies ensure that whenever a device performs a fabric login (FLOGI) request that the world wide
name (WWN) specified in the FLOGI is validated to be connected to the authorized port.
Enforcement for private loop devices not performing FLOGI is done through the name server.
Recommended
Action
No action is required.
Severity INFO
FW-1340
Message
, [FW-1340], ,, INFO, , , value
has changed(High=, Low=). Current value is .
Probable Cause Indicates that the number of login violations has changed. Login violations indicate that a login
failure has been detected.
Recommended
Action
Run the errShow command to determine the IP location of the login attempt. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity INFO
FW-1341
Message
, [FW-1341], ,, INFO, , , is
below low boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of login violations has fallen below the low boundary. Login violations
indicate that a login failure has been detected.
Recommended
Action
No action is required.
Severity INFO
FW-1342
Message
, [FW-1342], ,, WARNING, , , is
above high boundary(High=, Low=). Current value is
.
Probable Cause Indicates that the number of login violations has risen above the high boundary. Login violations
indicate that a login failure has been detected.