Dell POWEREDGE M1000E - Manual (Page 152)

76 Fabric OS Message Reference
53-1001767-01
BLS-1004
9
Probable Cause Indicates that an IPsec or IKE policy was deleted and the configuration file was updated.
Recommended
Action
No action is required.
Severity INFO
BLS-1004
Message
, [BLS-1004], ,, INFO, , Tape Read
Pipelining is being disabled slot port tunnel
configured tunnel ID (0-7)>.
Probable Cause Indicates that the FOS version on the remote end of the tunnel does not support the Tape Read
Pipelining feature.
Recommended
Action
No action is required.
Severity INFO
BLS-1005
Message
, [BLS-1005], ,, ERROR, , S
number>,P [OID 0x8x]: :
port faulted due to SFP validation failure. Please check if the SFP is valid for
the configuration.
Probable Cause Indicates a deteriorated SFP, an incompatible SFP pair, or a faulty cable between the peer ports.
Recommended
Action
Ensure that you are using compatible SFPs on the peer ports. Verify whether the SFPs have
deteriorated and the Fibre Channel cable is faulty. Replace the SFPs or cable, if necessary.
Severity ERROR