Dell POWEREDGE M1000E - Manual (Page 751)

Fabric OS Message Reference 675
53-1001767-01
Chapter
112
AUDIT AG System Messages
AG-1033
Message
AUDIT, , [AG-1033], ,, INFO, ,F_Port to
N_Port mapping has been updated for N_Port () .
Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the configuration file has been
updated.
Recommended
Action
No action is required.
Severity INFO
AG-1034
Message
AUDIT, , [AG-1034], ,, INFO, ,F_Port
cannot accept any more logins () .
Probable Cause Indicates that the F_Port has already logged in the maximum number of devices.
Recommended
Action
No action is required.
Severity INFO
AG-1035
Message
AUDIT, , [AG-1035], ,, INFO, ,Device
cannot login as ALPA value not available () .
Probable Cause Indicates that a device has already used this ALPA value.
Recommended
Action
No action is required.
Severity INFO
AG-1036
Message
AUDIT, , [AG-1036], ,, WARNING, ,Port
is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check
the admin guide for supported configuration .