Fcr-1028, Fcr-1029 – Dell POWEREDGE M1000E User Manual
Page 298
222
Fabric OS Message Reference
53-1001767-01
FCR-1028
34
Probable Cause
Indicates that the port world wide name (WWN) pool has rolled over in the specified slot, and WWN
entries detected to not be in use are reused as needed.
Recommended
Action
It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed
in a very large MetaSAN environment with large number of logical storage area network (LSAN)
devices and fabrics, or there are highly dynamic changes to EX_Port connectivity. WWN conflicts
might cause unpredictable behavior in management applications.
To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port or
VEX_Port connectivity should be disabled then re-enabled.
Severity
INFO
FCR-1028
Message
number> node WWN pool 95 percent allocated. Probable Cause Indicates that the node world wide name (WWN) pool is close to rollover in the specified slot, and Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port Severity INFO FCR-1029 Message number> port WWN pool 95 percent allocated. Probable Cause Indicates that the Port world wide name (WWN) pool has rolled over in the specified slot, and WWN Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port Severity INFO
that the WWN entries detected not in use will be reused as needed.
in a very large MetaSAN environment with large number of logical storage area network (LSAN)
devices and fabrics, or there are highly dynamic changes to EX_Port or VEX_Port connectivity. WWN
conflicts might cause unpredictable behavior in management applications.
connectivity should be disabled and then re-enabled.
entries detected not in use are reused as needed.
in a very large MetaSAN environment with large number of logical storage area network (LSAN)
devices and fabrics, or there are highly dynamic changes to EX_Port connectivity. WWN conflicts
might cause unpredictable behavior in management applications.
connectivity should be disabled and then re-enabled.