Ficn-1079, Ficn-1080, Ficn-1081 – Dell POWEREDGE M1000E User Manual
Page 338
262
Fabric OS Message Reference
53-1001767-01
FICN-1079
35
Recommended
Action
No action is required.
Severity
INFO
FICN-1079
Message
DevTapeEgr:WriteReport:Path=
state transitions while this tape was loaded>:Cmds=0x read commands processed while this tape was loaded>:Chains=0x emulated host chains processed while this tape was loaded>:MBytes= emulated read Kilobytes processed while this tape was loaded>. Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and Read Recommended Action No action is required. Severity INFO FICN-1080 Message DevTapeEgr:ReadCpReport:Path= state transitions while this tape was loaded>:Cmds=0x read commands processed while this tape was loaded>:Chains=0x emulated host chains processed while this tape was loaded>:MBytes= emulated read Kilobytes processed while this tape was loaded>. Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and Read Recommended Action No action is required. Severity INFO FICN-1081 Message DevTapeIng:LRJ received on Path= channel for this device> lastStatus=0x channel for this device> treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established
Block pipelining was performed on the currently loaded tape.
Channel Program pipelining was performed on the currently loaded tape.
to the CU.