Dell POWEREDGE M1000E - Manual (Page 712)

636 Fabric OS Message Reference
53-1001767-01
TRCE-1004
102
Probable Cause Indicates that a trace dump has been created on the switch or the indicated slot but is not
automatically transferred from the switch due to an FTP error, such as a wrong FTP address, FTP
site down, or network down.
Recommended
Action
If the message persists, run the supportFtp command to set up automatic FTP transfers; then run
the supportSave command and contact your switch service provider.
Severity ERROR
TRCE-1004
Message
, [TRCE-1004], ,, WARNING, , Trace dump <
optional slot indicating on which slot the dump occurs > was not
transferred because trace auto-FTP disabled.
Probable Cause Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended
Action
Run the supportFtp command to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity WARNING
TRCE-1005
Message
, [TRCE-1005], ,, ERROR, , FTP
Connectivity Test failed due to error.
Probable Cause Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong
FTP address, an FTP site down, or the network being down.
Recommended
Action
Run the supportFtp command to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity ERROR
TRCE-1006
Message
, [TRCE-1006], ,, INFO, , FTP
Connectivity Test succeeded to FTP site '
'.
Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the
supportFtp -t command.
Recommended
Action
No action is required.
Severity INFO