Pdm-1008, Pdm-1009, Pdm-1010 – Dell POWEREDGE M1000E User Manual
Page 537

Fabric OS Message Reference
461
53-1001767-01
PDM-1008
75
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1008
Message
get the number of U_Ports.
Probable Cause
Indicates the parity data manager (PDM) system call to getCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1009
Message
Port Config Data.
Probable Cause
Indicates the parity data manager (PDM) system call to setCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1010
Message
failed:
Probable Cause
Indicates the parity data manager (PDM) process could not open the specified file.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity
WARNING