Dell POWEREDGE M1000E User Manual
Page 96

20
Fabric OS Message Reference
53-1001767-01
System Module Descriptions
1
TRCK
The track change feature tracks the following events:
Turning on or off the track change feature
CONFIG_CHANGE
LOGIN
LOGOUT
FAILED_LOGIN
If any of these events occur, a message is sent to the system message log. Additionally, if the SNMP
trap option is enabled, an SNMP trap is also sent.
For information on configuring the track change feature, refer to the Fabric OS Command Reference
or the Fabric OS Administrator’s Guide.
TS
Time Service provides fabric time-synchronization by synchronizing all clocks in the fabric to the clock
time on the principal switch.
UCST
UCST is a part of the fabric shortest path first (FSPF) protocol that manages the Unicast routing table.
UPTH
UPATH is a part of the FSPF protocol that uses the SPF algorithm to dynamically compute a Unicast
tree.
WEBD
Indicates problems with the Web Tools module.
XTUN
XTUN Messages are generated by the 7800/FX8-24 FCIP Tunnel implementation. These messages
indicate status of FCIP Tunnels, FCIP Emulation Events for FCP traffic or FCIP Debug information
(FTRACE buffer status changes).
ZEUS
Zeus error messages indicate problems with the Zeus driver module.
ZOLB
Indicates problems with the zone library module.
ZONE
The zone module messages indicate any problems associated with the zoning features, including
commands associated with aliases, zones, and configurations.
TABLE 5
System Module Descriptions (Continued)
System
Module
Description